Science

The Power of the Sun In Your Own Backyard

The power of efficient photovoltaic cells is not derived just from one material, but rather from the tandem of multiple, intricately structured layers to truly harness sunlight.

Sunlight has been, and will be, humanity’s most abundant power source for billions of years. A source so universal cannot be overlooked—it must be harnessed. It reaches our rooftops limitlessly, yet often just bounces off and dissipates. Hence, solar panels have been implemented to harness this energy. Solar cells capture sunlight, exciting and loosening their silicon electrons to convert sunlight into electricity. However, photons, which sunlight is composed of, can come at different energy levels based on their wavelengths, making lower-energy photons too “weak” to energize solar cell material electrons, making solar cells incredibly inefficient and causing them to lose large amounts of energy. Thus, the power of typical solar cells is limited by their ability to effectively use solar energy. Addressing this issue by helping solar cells have stronger interactions with different wavelengths will prevent energy loss and allow efficiency to drastically increase. Understanding how different materials react with light and with one another may hold the key to having broader control over different energy photons.

Semiconductors stand at the core of how solar panels function. Semiconductors have the ability to conduct (transfer) electricity between that of a strong conductor (like a metal), which allows electricity to transfer through the substance, and an insulator, which resists conducting electricity. This middle ground gives semiconductors special traits: they lower the amount of energy needed to energize an electron by shifting the band gap between energy levels, while allowing them to easily control and direct the produced electricity. These special traits make semiconductors vital in technologies concerned with converting light into energy. For semiconductor conduction effects to occur, it must absorb a photon with enough energy to energize its electrons. Energizing these negatively charged electrons leaves the area they came from with a slight positive charge known as a hole, creating an electron-hole pair. The solar cell can help separate these positive and negative charges and produce a flow of electrons, and thus electricity.

Because silicon is abundant and requires relatively low energy to energize its electrons, it can use many different photon energies, making it efficient at converting light to energy; it is used as the primary semiconductor material within most solar cells using one semiconductor, known as single-junction solar cells. Even with optimal traits, many lower-energy photons are unable to energize silicon electrons, allowing some light to pass through without being converted into electricity. On the other hand, photons with excess energy excite the electrons but waste the excess energy as heat as the electrons fall back into their original positions. This limits the efficiency of single-junction solar cells.

Synthetic metal-halide perovskite materials have a specific but tunable crystal structure with metal and halogen atoms in their composition, making them strong and efficient semiconductors because the amount of energy needed to energize an electron can be further enlarged to better absorb high-energy photons or shifted to shorter wavelengths to better absorb low-energy photons. Because perovskites can utilize drastically different photon energies to make electricity, they are currently in the spotlight for solar cell technology. However, even then, there are solar cells that are even more efficient than those using just perovskites: solar cells using stacked silicon and perovskite in tandem allow us to truly harness the sun’s power.

Having a perovskite layer above a silicon layer helps us extract more energy. Perovskite crystals with a higher band gap can absorb higher-energy photons, while lower-energy photons pass through to the silicon layer to be absorbed. This mitigates energy loss and allows solar cells to absorb a larger portion of the solar spectrum than either material can alone. The efficiency of this architecture is undeniable, achieving levels impossible to obtain within single-junction silicon constructions. As of July 2026, Chinese solar cell producer LONGi has achieved a tandem efficiency of 35.5 percent, still below the cell’s theoretical limit. Controlling the sun’s energy is not a far-off goal; it depends on how far we can push current technology to its limits. 

Integrating this technology beyond the laboratory is the next step forward. Greater efficiency allows us to produce more electricity and helps us move toward a cleaner, more sustainable energy source for the world. Further work to improve such technologies will help us make solar energy reliable in densely populated and space-limited areas like cities. The potential of these technologies and improvements in the field of photonics are, as of now, boundless. However, silicon cells have upheld their position of reliability and dominance since 1954. To truly replace them, we must first address many issues before mass production and the replacement of single-junction with double-junction solar cells, including costs, production consistency, material degradation and lifetimes, and reliability. Until then, efforts are being made to make it the future’s reality.

Tandem technology may have only emerged recently, but through it, mankind has made countless leaps toward having broader spectral control, allowing us to harness power once impossible to capture through less efficient simple single-junction solar cells. Harnessing solar energy does not depend entirely on just collecting solar energy, but also relies on our understanding of the interactions between light, matter, and engineering materials. Keep looking out the window; one day, the sun hitting your face will play an even stronger role in powering a cleaner world.